2W151B Munitions Systems Journeyman, Volume 2 Practice Test

These questions are part of the practice quiz. Start practicing

• Which aircraft is capable of deploying the MK 65 Quickstrike mine?
• How does the classification of munitions impact their handling?
• What does munitions accountability entail?
• If a safety issue is identified during munitions operations, what is the appropriate action?
• Where are the time-to-arm (TA) and time-to-burst (TB) settings located on the B83 bomb?
• What is the primary component of a guided munition?
• What should be the first action if a munition is found to be damaged?
• Which of the following is a key component of munitions safety?
• What is the function of a detonator in a munition?
• What does a complete cluster bomb unit (CBU) consist of?
• Which bomb serves as a warhead for the GBU-10?
• Which aircraft can deploy AN/ALE-50 decoys?
• What is the significance of conducting regular audits in munitions management?
• In munitions, what does the term "sustainment" refer to?
• What is a REMIS in the context of munitions?
• What action should be taken if the timer knob of a LUU-2/B flare is accidentally pulled during ground handling?
• Which aircraft is known to carry the AGM-88 high-speed anti-radiation missile (HARM)?
• Which bomb is used as a warhead for all GBU-12 models?
• What two systems does the enhanced guided bomb unit (EGBU) utilize?
• What is the purpose of an explosive safety board?
• What role does Thermal Protection play in munitions safety?
• What is the main purpose of an ammunition supply point (ASP)?
• Which warhead does the GBU-24A/B utilize?
• What is one of the principal factors influencing the design of a munition?
• What does the term pyrophoric mean?
• Which type of rocket is used for target marking or incendiary effects?
• Which bomb category is not suitable for target penetration?
• What is typically evaluated during munitions validation processes?
• Which function does the fuzing system in munitions primarily serve?
• What does the 'kill mechanism' of a bomb refer to?
• What is the role of the munitions control center?
• Which bombs may use the FMU-143/B, A/B fuze?
• What component of the AIM-9X missile enhances maneuverability by deflecting rocket motor thrust?
• What does risk management involve in the context of munitions?
• What device provides the connection between the umbilical and the launcher umbilical of the AIM-120?
• What is the standard method for disposing of expired munitions?
• What does the acronym JDAM stand for?
• What are the four basic types of munitions?
• What type of bombs does the term "GBU" refer to?
• What is the weight of the GBU/EGBU-28?
• How can munitions systems technicians contribute to safety?
• Which operational aspect is crucial for maintaining munitions effectiveness?
• The design of nuclear bombs is similar to which type of general-purpose bomb?
• What color band is painted around high explosive (HE) munitions?
• In case of a malfunction, which bomb marking might require documentation on the AF Form 2434?
• What type of munition is characterized by being unguided?
• What is the maximum number of ADM-160B Miniature Air Launched Decoys (MALD) that the heavy stores adapter beam can carry?
• What does "Hazard Class 1.3" signify regarding explosives?
• What is the primary function of a fuze in munitions?
• Which component inside the guidance window of the AGM-65 must be checked before loading?
• What is the weight range of general purpose bombs currently in production?
• On the LUU-2A/B flare, what limits the timer travel between safe and 500 feet?
• What are the two basic types of impulse cartridges?
• What is the primary goal of operational risk management (ORM) in munitions?
• What type of launchers are the AIM-9 L/M series of missiles designed to be launched from?
• What is the risk associated with mishandling munitions?
• To ensure the bomb is safely armed, when should the timing lock be depressed?
• What performance factor differentiates kinetic energy penetrators from explosive munitions?
• Which fuze setting must be adjusted for pre-established detonation times in certain bombs?
• What is the primary purpose of munitions systems management?
• How often should munitions safety training be performed?
• Which of the following submunitions is classified as an anti-personnel munition?
• What is a common method for safely disposing of outdated munitions?
• How much does the GBU-39 weigh?
• In which configuration can the safety clip be reinstalled for the BDU-33B/B?
• What general class does the MK 84 bomb belong to?
• Which cluster bomb unit (CBU) features a SUU-65/B dispenser with kinetic energy penetrators?
• How many insertion markings indicate the end of service life for impulse cartridges with spring-loaded firing pins?
• When is the AIM-9 L/M warhead typically detonated?
• Which of the following describes a training round?
• What best describes the characteristics of operational munitions?
• Which aspect of a bomb fuze is critical for ensuring it detonates at the correct moment?
• What is an essential aspect of munitions operation planning?
• What is the suspension lug spacing for conventional bombs weighing up to 1,000 pounds?
• What color are all naval mine casings painted?
• How are bomb fuzes primarily classified?
• What distinguishes 20mm high explosive incendiary with tracer (HEIT) rounds from high explosive incendiary (HEI) rounds?
• What is the main function of an EOD technician?
• Why is the inspection of munitions considered critical?
• What does the term "explosive hazard classification" refer to?
• When does the firing delay time for the M904 mechanical nose fuze begin?
• In which section of the AIM-9 L/M missile can the four canards be found?
• What is a "Safety Data Sheet" (SDS)?
• What is the role of the primer in ammunition?
• Which components are the attach points for the AGM-86 to mate it to its ejector rack?
• Which type of rockets are classified as service rockets during combat?
• Which manual outlines the procedures for munitions operations?
• How many selectable height range functions does the FZU-39/B proximity sensor have?
• What is the main connection between the AIM-9 L/M missiles and the aircraft?
• What does operational testing help to assure in relation to munitions?
• What is the maximum allowable quantity of explosives for a given storage area called?
• In the context of munitions operations, what does the term "explosive safety" refer to?
• What type of practice bomb is classified as a 500-pound bomb?
• What is the significance of the cartridge case in a round?
• Which type of bomb can tear apart enemy fortifications effectively?
• How many AN/ALE-50 decoys can the B-1 carry?
• The fragmentation bomb is primarily made of which material?
• Which of the following describes white phosphorus?
• What class of bombs is typically used against reinforced concrete structures?
• What does "Munitions Response" involve?
• Which naval mine uses the MK 82 GP bomb as its warhead?
• Which two main classifications are essential for explosive devices?
• What does a mechanical fuze rely on for detonation after impact?
• What is the typical operating range for time fuzes in seconds?
• How can the AGM-86 warhead's arming device be safed?
• What initiator provides electrical power to the FMU-152 tail fuze?
• The BLU-113A/B serves as the warhead for which of the following?
• The AGM-158 is designed to use what class of warhead?
• Why is understanding the munitions lifecycle important?
• When can you remove the shielding tape from a rocket motor?
• What does "Quality Assurance" ensure in munitions systems?
• What is the purpose of a munitions safety release?
• What should be used to make scribe markings on the closure disc of an impulse cartridge?
• During flight, how is the AGM-65 missile held on the LAU-88 launcher?
• What is the only safety device found on the FMU-124A/B fuze?
• What is the role of munitions custodians?
• What does the acronym "TM" stand for in the context of munitions?
• What component of the SUU-64 and SUU-65 dispensers removes the tail section?
• Which of the following is NOT a type of chemical munition?
• Why should ammunition not be exposed to sunlight?
• What does a "Technical Order" (TO) provide in munitions management?
• Which component is mentioned as a feature of the GBU-15 model?
• A normal round with the primer and propellant charge removed is called a?
• What type of training is essential for personnel managing munitions?
• How are munitions classified?
• What safety equipment is mandatory when handling munitions?
• What does "munitions inventory" refer to?
• Which type of flare magazines is used by the F-15 and F-16 aircraft?
• What does "frag" refer to in munitions terminology?
• What are the two warHEAD configurations for the AGM-65?
• At what heights above ground do proximity fuzes typically produce airbursts?
• What must be done when changing the arming time settings on the M905 tail fuze?
• Which ammunition component actually starts the chain reaction to fire the round?
• Where are the countermeasure stations located on the F-22?
• What does Munitions Control primarily involve?
• The air inflatable retarder (AIR) is inflated by what method?
• What type of bomb is the BLU-109/B classified as?
• What type of bomb is specifically designed to maximize blast effects?
• What event occurs when the actuator lug is pulled up on the B61 nuclear bomb?
• Which Joint Direct Attack Munition (JDAM) model uses the MK-83 and BLU-110 as a warhead?
• Which type of munition is characterized by having a designed impact point and a guidance system?
• What factors must be considered when determining storage locations for munitions?
• What does the term "Safe for Flight" mean in munitions terminology?
• What is the subassembly of the B61 bomb that contains the strike enabling plug?
• Why must kinetic energy penetrator munitions be handled carefully?
• What does the term 'guidance system' refer to in munitions?
• Which bomb type uses a shaped charge for effectiveness?
• How many RR196/AL chaff bundles can be loaded in the ALE-52 magazines of the F-22?
• What type of safety device prevents accidental detonation of a munition?
• What is the purpose of the fin assembly on munitions?
• What is the primary target for shaped charge munitions?
• What feature does the BLU-108/B submunition incorporate to enhance distribution?
• Which of the following impulse cartridges is not case grounded?
• What component typically provides a ground for the electrical firing circuit in impulse cartridges?
• What is the purpose of munitions maintenance?
• What might indicate a malfunction in an impulse cartridge?
• When is it required to conduct a special munitions account?
• Where are the powered control surfaces located on the GBU-15?
• Which component protects the pins of the umbilical connector on the AGM-65 until just before loading?
• What is a Walkdown in munitions operations?
• What term describes the safe distance required when handling or transporting munitions?
• What is a RAAF code?
• What is typically found on the casing of bombs to indicate the type and purpose of the munition?
• Which submunition is specifically designed as an anti-tank mine?
• How is the effectiveness of munitions systems evaluated?
• How is the pulse code for standard laser guided bombs set?
• What is the primary kill mechanism of kinetic energy penetrators?
• What does the "Inert" designation signify about a munition?
• Which of these bombs is designed with only a tail fuze well?
• How are high-explosive bombs classified?
• What secures the aft cover to the stabilizer housing of the BSU-49 AIR bomb?
• What is the purpose of markings on munitions?
• Smoke munitions have which color band painted around them?
• What is the weight of the GBU-24A/B?
• What is the main purpose of the guidance system in a guided munition?
• In munitions handling, what does PPE typically include?
• How many flare magazines can be loaded onto the F-22?
• What does the acronym AFMAN stand for in munitions terminology?
• What is the role of a Quality Assurance Evaluator (QAE) in munitions operations?
• What is the purpose of the GBU-15 control surfaces?
• What is indicated if the rocket motor's arm/fire device (AFD) is in the safe condition?
• What caution should be taken when handling linked ammunition?
• What feature on proximity fuzes allows them to function effectively at varying altitudes?
• What does prolonged exposure to heat do to ammunition?
• Which precautions must you take to prevent exposure to harmful radiation when working around unfired munitions containing depleted uranium?
• What is a primary concern when handling explosives?
• Which type of projectile has a hollow body?
• Which type of rocket warhead produces blast, fragmentation, and mining effects?
• What is the purpose of the bomb arming wire assembly?
• What is the primary function of high explosive (HE) munitions?
• Which device aids the guiding of the EGBU besides the laser?
• What is a primary safety concern with linked ammunition?
• What is a consideration when packaging munitions for transport?
• Which factor is crucial for ensuring operational effectiveness in munitions management?
• What actions should a Munitions Systems Journeyman take in the event of a hazardous material spill involving munitions?
• Which of the following describes the role of a munition systems technician?
• What type of environment is suitable for ammunition storage?
• What does the term "demilitarization" refer to?
• Describe the process to follow when a munition is found outside its designated storage area.
• What is the weight of the BLU-113A/B penetrator bomb?
• What is the suspension lug spacing for the B61 bomb?
• Which cluster bomb unit (CBU) consists of kinetic energy penetrators arranged in packs?
• Which of the following is NOT a characteristic of non-explosive impulse cartridges?
• What component supplies electrical power to operate the FMU-139A/B fuze?
• How often must munitions inventories be conducted?
• How are the guidance canards of the AIM-9 L/M missiles controlled?
• Which ammunition round component expands in and seals the barrel's chamber to keep gas from escaping to the rear when the cartridge is fired?
• Which aircraft is equipped with MJU-17 flare magazines?
• Which explosive is commonly used in military ordnance?